Metro Cup (Cork Band) 115233
50Description: Fashion inspired 340mL reusable glass coffee cup with a secure push on silicone lid and a trendy heat resistant cork band. Glass is a natural choice for a clean, pure taste and it offers an eco-friendly alternative to single use paper cups. Metro Cup is presented in an unbleached cardboard gift box which has a window to show the branding and product care instructions are printed on one side.
This product is not dishwasher safe and handwashing is recommended.
Colours: Lid—Natural, Grey, White, Yellow, Orange, Pink, Red, Bright Green, Dark Green, Teal, Light Blue, Royal Blue, Dark Blue, Purple, Black.
Dimensions:
- Cup: Diameter 75mm × H 125mm.
- Optional gift tube: Diameter 103mm × H 158mm.
Specifications:
- Capacity: 340mL
- Insulation: single wall
- Lid attachment: push on
- Lid style: open lid
- Gift box (included) colour: natural
- BPA Free: Yes
- Hot liquid suitable: Yes
Materials:
- Cup: soda lime glass
- Lid: silicone
- Band: cork
Packaging: Natural gift box or optional gift tube.
Price: from NZD $7.58 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Specific Colour Print Band: 35mm × 25mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Laser Engraving Band: 30mm × 25mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
(Positions)
- 1
- 2
- 3
-
-
Specific Colour Print Gift tube: 50mm circle (tube or top of lid, one colour).×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
- 3
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Glass Cup | 40800 | - |
| Cork Band | 2000 | Mid Oct |
| Natural Lid | 1200 | - |
| Grey Lid | 1700 | - |
| White Lid | 4650 | Mid Oct |
| Yellow Lid | 870 | Late Aug |
| Orange Lid | 2900 | - |
| Pink Lid | 1750 | - |
| Red Lid | 3200 | - |
| Bright Green Lid | 2000 | - |
| Dark Green Lid | 2000 | - |
| Teal Lid | 6500 | - |
| Light Blue Lid | 1650 | Mid Oct |
| Royal Blue Lid | 4050 | - |
| Dark Blue Lid | 13400 | - |
| Purple Lid | 2600 | - |
| Black Lid | 14000 | - |
| Natural Gift Box | 53000 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
