Podium Medal (65mm)
115692
10
Description: 65mm diameter medals which are available in gold, silver and bronze. They can be ordered in one colour or a combination of colours at no extra cost. The medals are branded with the choice of laser engraving or a full colour resin coated finish on the front and laser engraving on the back.
Each medal is supplied with a ribbon lanyard which has a safety clip and can be branded in one colour on one side. The medals laser engrave to a natural etch.
Colours:
- Medal: Silver, Gold, Bronze.
- Lanyard: White, Yellow, Orange, Pink, Red, Bright Green, Dark Green, Light Blue, Dark Blue, Purple, Black.
Dimensions:
- Medal: Diameter 65mm × 2.5mm.
- Lanyard: W 20mm × L 810mm.
Packaging: Loose packed.
Price: from NZD $3.54 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour Medal
-
Select Colour Lanyard
-
Screen Print Lanyard: 250mm × 12mm (one colour).×
Screen Print
Screen printing is achieved by forcing ink through a fine mesh screen with a squeegee onto the product and is ideal for branding flat or cylindrical objects.
Advantages
- Large print areas are possible on both flat and cylindrical products.
- Close PMS matches are possible on white or light coloured products.
- Ideal for large solid areas of colour.
- Most screen print inks are quick drying and can be shipped immediately after printing.
- Metallic gold and silver is available.
Limitations
- Halftones and very fine lines are not recommended.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Unable to print variable data.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour Print (Resin Coated Finish) Medal (Front): 46mm circle (plus bleed if required).×
Resin Coated Finish
Resin coated finish is produced by printing the artwork onto a vinyl material with strong adhesive on the reverse. The branded area is coated with a crystal clear resin which is allowed to dry. Once dry, the finished decal is applied to the product and the adhesive forms a permanent bond.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Produces a stunning 3D effect that elevates the perceived value of a product.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Branding can bleed off the resin coated area.
Limitations
- Only approximate PMS colours can be reproduced.
- The resin requires a one day curing period before the product can be shipped.
- Metallic gold and silver colours are not available.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Laser Engraving Medal (Front or Back): 40mm circle.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Silver Medal | 1250 | - |
| Gold Medal | 670 | - |
| Bronze Medal | 22 | Mid Aug |
| White Lanyard | 1500 | - |
| Yellow Lanyard | 200 | Mid Aug |
| Orange Lanyard | 80 | - |
| Pink Lanyard | 390 | - |
| Red Lanyard | 630 | - |
| Bright Green Lanyard | 350 | - |
| Dark Green Lanyard | 660 | - |
| Light Blue Lanyard | 2650 | - |
| Dark Blue Lanyard | 0 | Mid Aug |
| Purple Lanyard | 41 | - |
| Black Lanyard | 160 | Mid Aug |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
