Flare Torch Power Bank 108049
25Description: Rechargeable aluminium torch with a 2200mAh power bank. Can be recharged in 4–5 hours from a USB port or a mains adapter. Comprehensive instructions and a Micro-B USB cable are included.
An optional EVA carry case and a triple connector cable are available on request.
Laser engraves to an oxidised white colour.
Colour:
- Torch: Black.
- Carry Case: Black.
Dimensions:
- Torch: Diameter 25.5 mm × L 108 mm.
- Carry Case: L 139 mm × W 80 mm × 50mm.
Packaging: Individual boxes or an optional carry case.
Specifications:
- Outer case: Aluminium
- Battery: Lithium-ion
- Capacity: 2200mAh
- Battery life: 500 charges (approximately)
- Input: 5V/500mA
- Output: 5V/1A
- Charging time: 4–5 hours
Price: from NZD $13.82 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Specific Colour Print Torch: 35mm × 12mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Laser Engraving Torch: 35mm × 11mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
-
Specific Colour Print Carry case: 65mm × 30mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Black | 190 | - |
| Large Black Carry Case | 1950 | Mid Oct |
| Triple Connector Cable | 9100 | Mid Sep |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
