Aspen Bamboo Stylus Pen
LL2035
250
Description: Bamboo push-button ballpoint pen with rubber stylus for touch screens. Aspen has a writing distance of 2.1km using a Black refill.
Bamboo is a natural material that produces unavoidable variances in the grain pattern, colour, and branding.
Colours: Silver, Gunmetal
Dimensions: Diameter 11mm × 140mm.
Materials: Bamboo barrel, ABS tip, rubber stylus, metal clip.
Packaging: Loose packed or optional sleeve, pouch or box.
Price: from NZD $0.78 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Select Colour
-
Specific Colour Print 60mm × 7mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
(Positions)- 1
- 2
-
Full Colour Print (Direct Digital) 70mm × 7mm.×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
(Positions)- 1
- 2
-
Laser Engraving 70mm × 7mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
(Positions)- 1
- 2
-
Personalisation (Digital Print) Per line×
Digital Print
This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Can be cut to special shapes.
- The branding can bleed off the edges of the product.
Limitations
- Only approximate PMS colours can be reproduced.
- Metallic gold and silver colours are not available.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Personalisation (Laser engraving) Per line×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
-
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Silver | 2430 | Mid May |
| Gunmetal | 10809 | Mid May |
| Natural Sleeve | 2667 | - |
| Black Sleeve | 10905 | - |
| White Sleeve | 5670 | - |
| Black Pouch | 3936 | Mid May |
| Black Box | 1586 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
