Limestone Speaker Wireless Charger 122469
10Description: Stylish 5W Bluetooth speaker with limestone casing and a natural bamboo surface with built-in 5W wireless charging capability. The speaker has a 600mAh battery that will play music for up to four hours and recharges in five hours.
Music can be played via Bluetooth or AUX input. Instructions and a Micro-B USB cable are included.
Bamboo is a natural material which produces unavoidable variances in the grain pattern, colour and branding.
Due to the nature of the natural limestone material, there can be slight unavoidable variances in the texture and finishing of the Limestone casing
Colour: Charcoal.
Dimensions:
- Speaker: H 77mm × W 108mm × 65mm.
- Gift box: H 100mm × W 135mm × 90mm.
Specifications:
- Input power: DC 5V/2A
- Sound output: 5W
- Bluetooth version: 5.0
- Bluetooth distance: maximum 10m
- Battery capacity: 600mAh
- Approx. charging time: 5 hours
- Audio play time: up to 4 hours
- Audio input: Bluetooth | AUX cable
- Music control: no
- Volume control: no
- Wireless charging position: Flat
- Output power: DC 5V/1A
- Wireless charging output: 5W
- Charging pads: 1
- Wireless charging indicator: single LED
- Wireless charging maximum induction distance: 2–6mm
- Wireless charging frequency: 110–205kHz
- Input cable: Micro-B, 50cm
Materials:
- Wireless charging surface: bamboo
- Speaker body: limestone
- Gift box: kraft cardboard
Packaging: Individual gift box.
Notes: Wireless charging will work at the optimum power level when used with a 5V/2.4A mains adaptor. Using a PC/laptop USB output may lead to slow charging, or not charging at all. Positioning on the charging surface and the material/thickness of the phone case may also impact wireless charging.
Price: from NZD $28.30 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Specific Colour Print 50mm × 40mm.×
Pad Print
Pad printing uses a silicone pad to transfer an image to a product from a laser etched printing plate. It is one of the most popular and affordable ways of branding promotional products due to its ability to reproduce images on uneven or curved products and print multiple colours in a single pass.
Advantages
- Ideal for printing on curved or uneven products.
- Close PMS matches are possible on white or light coloured products.
- Metallic gold and silver is available.
Limitations
- Halftones cannot be consistently reproduced.
- The size of branding areas is limited on curved surfaces.
- Unable to print variable data.
- Close PMS matches are more difficult on darker products and will only be approximate.
- Minor print distortion may occur on uneven or curved surfaces.
- Pad print inks require a curing period before the product can be shipped.
- A set up charge is required for each colour to be printed.
Artwork Requirements
- Artwork should be supplied in vector format.
(Colours)- 1
- 2
- 3
- 4
-
Laser Engraving 80mm × 40mm.×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Charcoal | 0 | - |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).
