Crystal Wireless Charger
LL0276
25
Description: Clear inductive, wireless charging pad that shows its internal components. It offers wireless charging/QI for compatible phones (most modern phones). You simply connect the charging pad to power using the Type C cable provided (Type C to Type C) then place your phone on the charging pad to charge.
This charger is capable of fast charge when connected to a power source of 9V/2A (also called a fast charge wall charger) and using the Type C cable supplied with the charger. When connected to a 5V/2A power source (a standard wall charger) it will charge the device at a slower rate.
An LED illuminates as it charges.
Comes with a 12 month limited technology warranty.
Colour: Clear
Dimensions: L 108mm × W 92mm × 14mm
Specifications:
- Material: Clear acrylic
- Voltage input: Type-C DC 5V,2A/DC 9V,2A
- Wireless output: 5W/7.5W/10W/15W
- Cable type: Type C to Type C
Packaging: Each charger supplied wrapped in tissue paper then inserted into an individual kraft gift box.
Price: from NZD $14.82 unbranded (if available). See your price—use the price calculator below.
Printing template (PDF file):
-
Full Colour Print (Direct Digital) Charger: 60mm × 20mm×
Direct Digital
Direct to product digital printing involves the transfer of ink directly from the print heads of an inkjet machine to the product and can be used to produce both spot colour and full colour branding on flat or slightly curved surfaces.
Advantages
- Ideal for printing dark coloured products as a layer of white ink can be printed under the artwork.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Instant drying so products can be shipped immediately.
- Offers larger print areas on many products and can print very close to the edge of flat products.
Limitations
- Only approximate PMS colours can be reproduced.
- Some colours cannot be reproduced including metallic silver and gold.
- The size of branding areas is limited on curved surfaces.
- Larger print areas tend to be more expensive.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
-
Laser Engraving Charger: 55mm × 20mm (LxW)×
Laser Engraving
Laser engraving produces a permanent natural finish using a laser to mark the product. Different materials produce different effects when engraved so to avoid uncertainty pre-production samples are recommended.
Advantages
- Higher perceived value than other forms of branding.
- The branding becomes part of the surface and is permanent.
- Gives a similar finish to etching on glassware at a much lower cost.
- Can mark curved or uneven products.
- Can produce variable data including individual names.
- The product can be shipped as soon as marking is finished.
Limitations
- The size of branding areas is limited on curved surfaces.
- Fine detail can be lost on smaller products like pens.
Artwork Requirements
- Artwork should be supplied in vector format.
-
Full Colour (Digital Print) Box sleeve: 322mm × 111mm×
Digital Print
This production method is used for printing media such as paper, vinyl and magnetic material used in the manufacture of labels, badges and fridge magnets, etc.
Advantages
- Ideal for producing vivid full colour images as well as spot colour branding.
- Can print variable data including individual names.
- Only one set up charge is required irrespective of the number of print colours.
- Can be cut to special shapes.
- The branding can bleed off the edges of the product.
Limitations
- Only approximate PMS colours can be reproduced.
- Metallic gold and silver colours are not available.
Artwork Requirements
- Artwork can be supplied in either vector or bitmap format.
- Bleed of 3mm should be added to the artwork if it bleeds off the product (the image goes to the edge).
Stock Levels
(Quantity = currently in stock; Next Shipment = when even more stock arrives with supplier)
| Item | Quantity in stock | Next Shipment |
|---|---|---|
| Clear | 5726 | - |
| 3 in 1 Combo Cable | 2179 | Late May |
Leadtime: Allow around 2 weeks from artwork approval/payment receipt to delivery to your attended courier address (depending on stock availability and branding methods).